Understanding erosion and the concept of erosion control

Spread the love

Erosion control is a great way to protect your home from excessive rain, wind and water. If you have a building, property or outdoorsy thing you care about, erosion control is a great way to protect it. It’s not just for businesses and large developments anymore. It is a growing industry across the world and this article will give you some tips on how to get started doing it yourself.

It is also vital that you indulge in a bit of research work on your own. You need to search the keyword erosion control in Australia so that you can get more insight.

What Causes Erosion?

Soil Erosion Occurs Due To Wind And/Or Water. Anytime you have surface runoff, whether it be rainwater or snow melt, the possibility of soil erosion exists. The force of gravity causes water to run down hillsides, into ditches, valleys, and any low-lying areas. Fast moving water has the power to pick up loose dirt and topsoil, depositing it further down the slope or stream bank.

It’s critical to take steps to control erosion issues before they get out of hand. The following tips can help you keep your property from experiencing serious erosion problems:

Remedies for erosion control

1. Install water controls.

2. Reduce soil erosion by keeping the ground covered year-round.

3. Limit the amount of exposed soil with grasses, mulches, and other vegetation.

4. Avoid using heavy equipment over wet ground, which can cause soil erosion and damage your property’s foundation.

5. Keep weeds and vegetation mowed short for better aesthetics and a more effective storm water management system.

To prevent soil erosion during trenching work, it is best to first use water bars and swales along the trenches.

Water bars and swales are both used to control water flow in order to prevent soil erosion during trenching work. A water bar can be used when there is a large amount of runoff. It prevents running water from entering the trench while providing drainage for excess water from the watershed area. A swale works well when there is little or no runoff, as it directs surface run-off into the trench by using berms and banks for collection before directing it into the trench or away from it. The runoff then hits an outfall structure at the lower end of the swale that allows water to flow back into its original place.

The best way to combat erosion is start preventative efforts early in the planning stages of construction. Planning is key among these tips for erosion control. When you think about building something, ask your contractor if they have an expertise in erosion control and what measures they can take in your area. The more you plan ahead the less chance there is of soil being washed away.

For the most part, erosion control is a constructive process. If a home owner notices erosion starting to take place, he or she can take steps to mitigate that damage before it gets out of hand. There are also many ways for homeowners to prevent erosion in the first place by building retaining walls, siding houses with stone or stucco, and using plants on hillsides to stabilize slopes. The key is to act quickly before problems start becoming unmanageable.

Social Share Buttons and Icons powered by Ultimatelysocial