Is your Netgear WiFi extender giving you a bad day due to poor performance, especially on weekends? Well, we realize how thwarting it is to experience the buffer icon when streaming videos or downloading important content. In case your Netgear extender is not working the way you want, then applying the fix provided in this article may help.
In this article, we have highlighted some simple but effective techniques that can immediately improve the performance of the Netgear WiFi range extender. Let’s get started!
Tip 1: Update Your Netgear Extender Firmware
Your Netgear WiFi extender requires to be updated now and then to correct several errors to achieve high performance. Updating the firmware of your Netgear extender can improve the performance of the device, add new features, and improve security.
Therefore, consider updating your Netgear extender’s firmware by visiting the Netgear extender setup wizard via www.mywifiext.net.
Tip 2: Change the Location of Netgear Extender
Yes, you read that right! The location of your Netgear WiFi range extender can greatly affect its performance. If you have kept the Netgear range extender inside a cabinet, in a corner, or under a table, you should place it in an open and higher area.
It is best to place your Netgear extender in the middle of your house and close to your existing router or modem. In addition, make sure that your Netgear extender is outside the range of a public/ neighboring/ unknown WiFi network.
Tip 3: Reboot Your Netgear Extender
Just like your PC, laptop, or mobile device, your Netgear Extender also requires to be rebooted regularly. On the off chance if you haven’t restarted or turned off and turned on the Netgear WiFi extender for a long time, then it’s time to get the job done.
You only need to unplug the Netgear extender from the power outlet and disconnect it from the connected device. Count to 30 and then reconnect the extender to the power outlet. When finished, reconnect your device to the extender’s WiFi and check the performance of the Netgear device by accessing the settings page of the Netgear extender using 192.168.1.1 IP.
Tip 4: Change the WiFi Channel of Your Extender
After the Netgear wireless range extender is set, the channel is usually selected by default is 2.4 GHz. If a range extender nearby you is running on the same channel, it may cause your device to perform poorly. So, it is extremely important to select the least-crowded channel for your Netgear WiFi range extender to improve its performance.
In the event that you are not sure which channel is the least crowded for your Netgear WiFi range extender, we welcome you to contact our professional technical experts for quick help anytime.
Tip 5: Perform the Netgear Extender Setup Properly
This is one of the main reasons why you are getting poor performance from your Netgear wireless extender. Therefore, in order to increase the coverage of your Netgear extender and take your internet experience to a higher level, we recommend that you configure the device completely and correctly.
To configure your Netgear extender, use the mywifiext URL to navigate to its configuration page.
Note: If the mywifiext URL does not work for you, it is recommended to perform Netgear genie download and configure your WiFi extender the right way.
The Bottom Line
The fixes mentioned in this article will definitely help you get high performance from your Netgear range extender. Share your thoughts with other readers. In addition, please share with us which suggestions are useful to you. In case you have any other suggestions on how to improve the performance of the Netgear WiFi range extender, you can share them with us via comments.