An irrigation network is a network of both temporary as well as permanent waterways which helps in supplying water to the irrigated lands from any irrigation source. It is the main component of any kind of irrigation system. For easing the work of farmers, different types of pipeline accessories for irrigation are used. Reach out to the supplier who provides reliable and leak-resistant pipeline accessories. Read this blog to explore more about irrigation types and pipeline accessories.
What are the different types of irrigation systems?
There are different methods of doing irrigation and the types are mentioned below:
a) Pipe Irrigation
There are different and varied methods used for agricultural irrigation. Among them, one of the best and most conventional methods is pipe irrigation. This type of irrigation is considered the oldest and best method with a few logical benefits. Pipe irrigation methods enable precise and proper irrigation with even water distribution over the complete surface area. If you use this method, water resources can be optimally used when the wind drift is comparatively low. The pipe irrigation method is an ideal procedure for vegetable crops like carrots, new potatoes, onions etc.
b) Classic irrigation system
The classic irrigation system is another best method that uses sprinkler lines. This system is suitable for small farms and areas where a sufficient amount of workforce is there for operating the whole system. What does its piping system consist of? The main components of the piping system of classic irrigation pipes are
a) Pump unit that consists of electro or diesel pump unit, tractor
b) The main unit usually contains pipes that are fast-coupling pipes or laid in the ground though it depends on specific systems.
c) The third ones are pipelines and sprinklers which are required to get moved to another position when the desired precipitation has been achieved. Small sprinklers are apt for this classic irrigation system. The kind of sprinkler used depends highly on the irrigated lands’ size.
For classic irrigation systems, the average expenditure of operational work is around two to three hours/ hectare. You can reach out to one of the most trusted pipeline accessories for irrigation suppliers in the Middle East and GCC region.
c) Hose pull system
The hose reel irrigation system is one of the upgraded systems of irrigation used throughout the world. This type of irrigation system is also known as the “Travelling gun system”. It contains sprinkler heads.A hose pull system is one step toward an irrigation procedure which saves time. This irrigation process contains these components: a) Pumping unit which contains an electro or diesel pumping unit and a tractor. b) sprinkler line and sprinkler consist of sprinklers which are not mounted directly on the pipes used but on the carts that are linked with three or four inches hoses that are connected to one end of the pipe. If you want to move this sprinkler, adjust those sprinkler carts, then pull hoses. So, it leads to a very less workload and helps in saving time for farmers. With 40 metres hose length. It is easily possible to irrigate one trip of 90 metres. Around thirty per cent, less work is needed when compared to the traditional irrigation system. The work expenditure for farmers can be around 1.5 hours/hectare.
d) Pipe grid irrigation system
A pipe grid irrigation system is an extension of traditional irrigation machines. A pipe grid system usually contains pipes that can cover the whole field. These pipes are well-laid at the start of the irrigation system. During irrigation procedures, these pipes stay in one place. Just the sprinklers are required to be moved at least 18 metres further. It needs some labour requirements. Work expenditure for the pipe grid irrigation system is approximately 1 hour/ hectare. It highly depends on the pipes’ length that one/two sprinklers can be in operation. This system can enable the usage of small pipes by making it a cost-efficient solution. When you use a pipe grid system, medium and small sprinklers can also be used so that low irrigation intensity can be reached. For making any irrigation system work, good quality pipeline accessories for irrigation are necessary.
What are some of the features that pipeline accessories for irrigation must have?
There are some features which pipeline accessories should have: Irrigation pipelines and their accessories must be chemically resistant, fire resistant, must have low thermal conductivity, corrosion resistant etc. The pipeline accessories are generally made by sticking to compliance and standards. Testing must be done for these accessories. So try to select the best quality pipeline accessories which ease and simplify work. Pipeline accessories for irrigation affect the irrigation system and on them, the productivity of the system depends and the yield of the crops. Select top-quality pipeline accessories which can turn the labour-intensive work into less workload. Without wasting time get in touch with one of the leading suppliers of irrigation pipeline accessories.